For Omron UMA Series Safety Mats Replacement | 1-cable Mats

group name: OMRON Safety Mat Replacement

Min Order: 1 piece

brand name: DADISICK

model: UMA Series | UMMA-0300-0300-1, UMMA-0400-0400-1, UMMA-0500-0250-1, UMMA-0500-0400-1, UMMA-0500-0500-1, UMMA-0500-1500-1, UMMA-0600-0400-1, UMMA-0750-0250-1, UMMA-0750-0500-1, UMMA-0750-0750-1, UMMA-0750-1500-1, UMMA-1000-0500-1, UMMA-1000-0750-1, UMMA-1000-1000-1, UMMA-1000-1250-1, UMMA-1000-1500-1, UMMYA-0300-0300-1, UMMYA-0400-0400-1, UMMYA-0500-0250-1, UMMYA-0500-0400-1, UMMYA-0500-0500-1, UMMYA-0500-1500-1, UMMYA-0600-0400-1, UMMYA-0750-0250-1, UMMYA-0750-0500-1, UMMYA-0750-0750-1, UMMYA-0750-1500-1, UMMYA-1000-0500-1, UMMYA-1000-0750-1, UMMYA-1000-1000-1, UMMYA-1000-1250-1, UMMYA-1000-1500-1

Delivery clauses under the trade mode: CIP

Acceptable payment methods: T/T

update time: Sat, 06 Dec 2025 04:30:34 GMT

contact supplier

Paramtents

Series: UMA Series
Activation force: 300 N min. to 80 mm dia. test piece
Maximum load: 2,000 N to 80 mm dia. test piece
Response time: 50 ms max
Material: Polyurethane
Degree of protection: IP65
Certifications: CE

Packging & Delivery

Min Order1 piece

Briefing

DADISICK's DT11, DT14, and DT15 series safety mats can withstand maximum dynamic loads of 200 kg/cm², 500 kg/cm², and 200 kg/cm², respectively. DADISICK offers a highly cost-effective alternative for replacing other safety mat brands.

Detailed

For Omron UMA Series Safety Mats Replacement Parameter

Brand	From network		DADISICK
Brand	Models	Dimensions	Models	Dimensions
Technical data	UMMA-0300-0300-1UMMYA-0300-0300-1	300 mm × 300 mm	DT15-300X300	300 mm × 300 mm
	UMMA-0400-0400-1UMMYA-0400-0400-1	400 mm × 400 mm	DT15-400X400	400 mm × 400 mm
	UMMA-0500-0250-1UMMYA-0500-0250-1	500 mm × 250 mm	DT15-500X250	500 mm × 250 mm
	UMMA-0500-0400-1UMMYA-0500-0400-1	500 mm × 400 mm	DT15-500X400	500 mm × 400 mm
	UMMA-0500-0500-1UMMYA-0500-0500-1	500 mm × 500 mm	DT15-500X500	500 mm × 500 mm
	UMMA-0500-1500-1UMMYA-0500-1500-1	500 mm × 1500 mm	DT15-1500X1000	1500 mm × 1000 mm
	UMMA-0600-0400-1UMMYA-0600-0400-1	600 mm × 400 mm	DT15-600X400	600 mm × 400 mm
	UMMA-0750-0250-1UMMYA-0750-0250-1	750 mm × 250 mm	DT15-750X250	750 mm × 250 mm
	UMMA-0750-0500-1UMMYA-0750-0500-1	750 mm × 500 mm	DT15-750X500	750 mm × 500 mm
	UMMA-0750-0750-1UMMYA-0750-0750-1	750 mm × 750 mm	DT15-750X750	750 mm × 750 mm
	UMMA-0750-1500-1UMMYA-0750-1500-1	750 mm × 1500 mm	DT15-1500X750	1500 mm × 750 mm
	UMMA-1000-0500-1UMMYA-1000-0500-1	1000 mm × 500 mm	DT15-1000X500	1000 mm × 500 mm
	UMMA-1000-0750-1UMMYA-1000-0750-1	1000 mm × 750 mm	DT15-1000X750	1000 mm × 750 mm
	UMMA-1000-1000-1UMMYA-1000-1000-1	1000 mm × 1000 mm	DT15-1000X1000	1000 mm × 1000 mm
	UMMA-1000-1250-1UMMYA-1000-1250-1	1000 mm × 1250 mm	DT15-1500X1000	1500 mm × 1000 mm
	UMMA-1000-1500-1UMMYA-1000-1500-1	1000 mm × 1500 mm	DT15-1500X1000	1500 mm × 1000 mm
Activation force	300 N min. to 80 mm dia. test piece		20 kg min. (20 kgf ≈ 196.1 N)
Maximum load	2,000 N to 80 mm dia. test piece		400 N/cm² (up to 8 h)
Response time	50 ms max		18 ms
Material	Polyurethane		NBR
Degree of protection	IP65		IP65 / IP67
Certifications	CE		TÜV
Connection	2/5/10 meters M8 4-pin		Quick-connect: Two ends 0.1 meter (Ø 4 mm 2 × 0.2 mm²) R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
Mechanical life	＞ 1,000,000 times		＞ 3,000,000 times
Ambient operating temperature	-10℃ to 55℃		-10℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.

Product model display instructions

The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand Omron's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.

Product recommendations

DT15 series safety mats

Models：

DT15-300X300, DT15-400X400, DT15-500X250, DT15-500X400,
DT15-500X500, DT15-600X400, DT15-750X250, DT15-750X500,
DT15-750X750, DT15-1000X250, DT15-1000X500, DT15-1000X750,
DT15-1000X1000, DT15-1500X500, DT15-1500X750, DT15-1500X1000

Tips:

For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².

Data sheet download

FAQ

1. Are your safety floor mats compliant with industry standards and regulations?

Yes, our safety floor mats adhere to all relevant industry standards and regulations, ensuring that they meet the highest safety requirements. We prioritize compliance and take great care to ensure that our products provide reliable and trustworthy performance in any industrial setting.

2. How durable are your safety floor mats?

Our safety floor mats are engineered using high-quality materials and undergo rigorous testing to ensure durability and longevity. They are designed to withstand the rigors of industrial environments, providing reliable performance even in harsh conditions.

3. What kind of warranty do you offer for your safety floor mats?

We stand behind the quality and reliability of our products, which is why we offer a comprehensive warranty to cover any manufacturing defects or issues. Our warranty ensures that you can have peace of mind knowing that your investment in our safety floor mats is protected.

Disclaimers

The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.