For Schmersal SMS 5 Series 250 mm x 500 mm Safety Pressure Mats Replacement | 2 x 2-wire Connecting Cable Type

group name: SCHMERSAL Safety Mats Replacement

Min Order: 1 piece

brand name: DADISICK

model: SMS 5 Series | SMS 5-250-500

Delivery clauses under the trade mode: CIP

Acceptable payment methods: T/T

update time: Sat, 06 Dec 2025 07:04:07 GMT

contact supplier

Paramtents

Series: SMS 5 Series
Activation force: 150 N with round body Ø 80 mm
Maximum load: 2,000 N / Ø 80 mm
Response time: ≤ 25 ms
Material: Polyurethane PUR
Degree of protection: IP65
Certifications: TÜV, cULus

Packging & Delivery

Min Order1 piece

Briefing

DADISICK's DT11, DT14, and DT15 series safety mats can withstand maximum dynamic loads of 200 kg/cm², 500 kg/cm², and 200 kg/cm², respectively. DADISICK offers a highly cost-effective alternative for replacing other safety mat brands.

Detailed

For Schmersal SMS 5 Series 250 mm x 500 mm Safety Pressure Mats Replacement Parameter

Brand	From network	DADISICK
Models	SMS 5-250-500	DT15-500X250
Dimensions	250 mm × 500 mm × 14 mm	500 mm × 250 mm × 15 mm
Activation force	150 N with round body Ø 80 mm	20 kg min. (20 kgf ≈ 196.1 N)
Maximum load	2,000 N / Ø 80 mm	400 N/cm²
Response time	≤ 25 ms	18 ms
Material	Polyurethane PUR	NBR
Degree of protection	IP65	IP65 / IP67
Certifications	TÜV, cULus	TÜV
Connection	2 x 2-wire connecting cable	Quick-connect: Two ends 0.1 meter cable (Ø 4 mm 2 × 0.2 mm²) R Type: 5 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²) K Type: 2 cables 2 meters 2-core cable (Ø 4 mm 2 × 0.35 mm²)
Mechanical life	＞ 1,500,000 times	＞ 3,000,000 times
Ambient operating temperature	0℃ to 55℃	-10℃ to 55℃
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.

Product model display instructions

The brands and specifications shown on this page are for product selection only. Our safety mats is a safety part made by DADISICK, not official brand Schmersal's products. DAIDSICK offer replacement for official brand products. We are not the owner of the brands. If you need to buy official brand products, please contact the brand official representative.

Product recommendations

DT15 series safety mats

Models：

DT15-300X300, DT15-400X400, DT15-500X250, DT15-500X400,
DT15-500X500, DT15-600X400, DT15-750X250, DT15-750X500,
DT15-750X750, DT15-1000X250, DT15-1000X500, DT15-1000X750,
DT15-1000X1000, DT15-1500X500, DT15-1500X750, DT15-1500X1000

Tips:

For non-standard dimensions of safety mats, the side length should be ＜ 3000 mm, and the area should ≤ 1.5 m².

Data sheet download

FAQ

How are pressure sensitive safety mats installed?

A: Pressure sensitive safety mats are usually installed on the floor in the area to be monitored and connected to the safety control system. Ensure the mat is flat and unobstructed during installation, and follow the manufacturer's instructions for electrical connections.

Disclaimers

The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.