For Pepperl+Fuchs Optical Data Couplers LS610-DA Replacement | 120 m Operating Range

group name: Pepperl+Fuchs Optical Data Couplers Replacement

Min Order: 1 piece

brand name: DADISICK

model: LS610-DA Series | LS610-DA-P/F1, LS610-DA-P/F2, LS610-DA-IBS/F1, LS610-DA-IBS/F2

Delivery clauses under the trade mode: CIP

Acceptable payment methods: T/T

update time: Sat, 06 Dec 2025 05:33:27 GMT

contact supplier

Paramtents

Series: LS610-DA Series
Transmission distance: 0 ... 120 m
Data transmission rate: 93.75/187.5/375*/500/1500 kBit/s configurable...
Supply voltage: 18 ... 30 V DC
Power consumption: 200 mA

Packging & Delivery

Min Order1 piece

Briefing

DADISICK's ST100 Series Optical Data Transmission Module can serve as a replacement for the LS610-DA Optical Data Couplers.

Detailed

Technical Data

Wiring Diagrams

Downloads

For Pepperl+Fuchs Optical Data Couplers LS610-DA Replacement | 120 m Operating Range

Brand	From network	DADISICK
Models	LS610-DA-P/F1	ST100-120E3
	LS610-DA-P/F2
	LS610-DA-IBS/F1
	LS610-DA-IBS/F2
Dransmission distance	0 ... 120 m	120 m
Data transmission rate	93.75/187.5/375/500/1500 kBit/s configurable ( not in TVT mode); 0 ... 2 MBit/s	100 Mbit/s
Supply voltage	18 ... 30 V DC	DC 10V - 30V
Power consumption	200 mA	3 W（max）
Interface	PROFIBUS, galvanically isolated; RS 422, IBS termination integrated, galvanically isolated	Ethernet, Unlimited
Light source	infrared light	Laser, Calibration light: 650 nm, Communication light source wavelength: E3 785 nm/E4 850nm
Light angle	1.1° (Opening angle)	1° (divergence angle) 1.5° ( receiving angle)
Connection	Connector M12	Connector M12
Dimensions	90 mm x 170 mm x 171 mm	102 × 84 × 140.5 mm
IP rating	IP65	IP65
Operating temperature	-10 ... 50 °C (263 ... 323 K)	-10℃~55°C (indoor use)
We are able to reproduce the specific connection configuration of each brand with high level of accuracy.

Product Model Display Instructions

The brands and specifications displayed on this page are for reference and product selection purposes only. The optical data transmission devices we provide are manufactured by DADISICK and are not official products of Pepperl+Fuchs or any other brand mentioned. DADISICK offers compatible alternatives to official brand products. We do not own the rights to these brands. For genuine Pepperl+Fuchs products, please contact the brand's authorized representative directly.

Product Recommendations

Optical Data Transmission Module ST100 Series

Model:

ST100-80E3

ST100-100E3

ST100-200E3

Datasheet download

FAQ

What should I do if the communication is interrupted?

Check the alignment, power status, and signal strength of the device. If communication cannot be restored, please refer to the troubleshooting section or contact technical support.

Disclaimers

The product model information provided on this website is sourced from public channels, aiming to provide users with reference for product comparison and selection. This website does not guarantee the accuracy, completeness, or reliability of information, nor does it constitute a recommendation or recognition of any brand or company. Users should verify and bear corresponding risks when using the information provided on this website. This website shall not be liable for any loss or damage caused by the use of information on this website.